Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ tail piece part number for full size interchangeable core rim cylinders ”

RELATED FAQS

Resolution: DESCRIPTION PART NUMBER Conventional Core 23-030 Conventional Core less logo 23-031 Primus Core 20-740 Primus XP Core 20-740-XP Primus Core less logo 20-741 ...:

What is the part number for T lock tailpiece used with a conventional cylinder?

Resolution: The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 show...:

What is the part number for a full size interchangeable core control key?

Resolution: Classic Conventional Key Blanks and Cut Keys Part Number Description Key Blanks 35-056 Control Standard bow, embossed both sides 35-076 Standard bow, unembossed both s...:

Which way is the tail piece of the rim cylinder is inserting into the Von Duprin 98/99 rim device from 996L trim?

Resolution: The tailpiece of the rim cylinder can be inserted into the Von Duprin 98/99 rim device either vertical or horizontal (using the tailpiece guide).:

How to order the mortise full size interchangeable core with a construction core.

Resolution: This only applies to the full size interchangeable cores. The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed). Simply add (-ICX) to the end o...:

What cylinders are available with UL437?

Resolution: UL437 is testing requirement that cylinders pass both a timed cylinder pick test, a forceful core/cylinder pull test as well as a destructive entry test. We have various c...:

What is the part number for a control pin for a 23-030?

Resolution: There are two parts that can be referred to as control pins for a 23-030 (FSIC core).C603-967 is the lower control pin that sits in the seventh hole of the FSIC plug. (part B in exploded view) ...:

What is the part number for the full size core driver for the ND series?

Resolution: The ND-Series FSIC driver is part number N523-127.: