Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ sus hhd software ”

Resolution: Make sure the HHD/SUS is set to USB communication by checking the small icon right of the "No Device Connected" message. The symbol should be a USB symbol when working with USB enable product...:

Where can I download the latest version for the Schlage Utility Software?

Resolution: Updating the Schlage Utility Software (SUS) on a Hand Held Device (HHD) will cause the SUS "Login Password" AND the current device "Coupling Password" to be reset to factory default settings of - 1...:

How do I program Locknetics CM / CL legacy locks with the Schlage Utility Software (SUS) and Hand Held Device (HHD)?

Resolution: - With the CIP NOT inserted and the Schlage Utility Software (SUS) running o Enter the Master Programming PIN or Present Loc...:

Which AD firmware package version supports WRI400/CT5000 devices?

Resolution: SUS 4.4.0 released on 06/06/2011 is the first released SUS version compatible with WRI400 and CT5000 devices.:

Can the low coin cell Nuisance delay be Disabled on a CO200?

Resolution: The coin cell is ignored when the lock sets are used with Manual Programming ONLY or while in Construction mode.:

Why does the Schlage Utility Software application display the error message "E201 - This device is not connected?"

Resolution: The E201 message can be ignored and all normal SUS and lock functions will be maintained. Click "OK " and continue. Update the Schlage Utility Software (SUS) to version 4.6.0 or highe...:

Does SUS (Schlage Utility Software) run on the HP IPAQ PDA?

Resolution: The SUS (Schlage Utility Software) will not run or work on the older HP IPAQ PDAs. The older HP IPAQ PDAs run CEUplink to interface and program legacy locks. The SUS (Schlage Utility Software) will...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ sus hhd software ”

RELATED FAQS