Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ surface vertical rod with electromagnetic lock ”

Resolution: It can be installed frame side of the rods, if there is room for it on the door. Note: The holding force will be reduced when the maglock is not installed as close to the edge of the door as ...:

Is the Von Duprin 1609 strike fire rated for pairs of doors?

Resolution: The Von Duprin 1609 cannot be used on a pair of fire rated doors. We recommend using the Von Duprin fire rated mortise exit device in lieu of the rim device such as the Von Duprin 5575-F,...:

Can an electric strike be used with a surface vertical rod device on a fire-rated door?

Resolution: Not for use in fire rated openings.:

Why should you use the LX switch with an ALK being used in Von Duprin surface vertical rod devices?

Resolution: An RX switch would only trigger the ALK Alarm Kit when the pushpad of the device is depressed.Surface Vertical Rod (SVR) Devices such as the 2227, 33/3527A, 98/9927, and 98/9957 devices could be op...:

What causes the top rod case to pull away from or strip out of the face of a steel door?

Resolution: Hardware falling off a door is caused by one or all of the following issues: Field abuse Improper internal reinforcements in the door Improper field preparation The top or bottom rod case can...:

What is the part number for the former F588 from Monarch?

Resolution: The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588.:

Can the XX-V, 19-V, 24-V or 25-V extension rod be used on the bottom rod?

Resolution: The extension rod could be used either on the top or bottom rods.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ surface vertical rod with electromagnetic lock ”

RELATED FAQS