surface vertical rod , coordinator


For non fire rated doors only the 1609 strike would be used on the inactive leaf that is flush/surface bolted or with a *surface or concealed vertical rod device on other door leaf.
Hardware falling off a door is caused by one or all of the following issues: Field abuse Improper internal reinforcements in the door Improper field preparation The top or bottom rod case can...
The Von Duprin 1609 cannot be used on a pair of fire rated doors. We recommend using the Von Duprin fire rated mortise exit device in lieu of the rim device such as the Von Duprin 5575-F,...
The extension rod could be used either on the top or bottom rods.
The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588.
You should use the LX switch with the Von Duprin surface vertical rod exit device because the rods are exposed and are vulnerable to attack. IE, the top rod can be grasped and forced down to retrac...
The 6111 electric strike can be used only on non rated openings less bottom rod with pullman top latch (use ES prefix when ordering device). Device back set will change to match the centerline of t...
Not for use in fire rated openings.
9827-F Series ,9827-F Series, 8827-F, 2227-F
2227, 3327A, 3527A, 9827, 9927, 8827, 24V, 25V, 19V, XX-V, 27, 5527, 8827, 9827, 33A27, 35A27
SV, V (27)
Exit device with surface applied rods connected to top and bottom latches.
The 812L trim is available for the 18 series as it is still used on the XX series.  When ordering, state the type of device trim is being used on: rim, mortise, or surface vertical rod.