Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Standard vision panel locations ”

RELATED FAQS

Resolution: Vision Panel, Glass light, Glasslight; V, V-Light, 10 X 10 light:

What is Steelcraft's standard hinge locations for a 6'8" high frame from head to top of each hinge?

Resolution: The location to the top of hinge will vary depending on hinge size used. 6'8" Frame with 1 1/2 pair of hinges (top to top): For 4 1/2" hinges from the head to top of each hinge is 7 1/2", 37 7...:

HALF GLASS LIGHT

Resolution: G, G-Light; Vision Panel:

FULL GLASS LIGHT

Resolution: FG, FG2, FG3; Vision Panel:

What is the standard undersize for Steelcraft transom panels?

Resolution: Steel transom panels are available: 1 3/4" thick panels - supplied in L-Series (L20, L18 or L16-Series) laminated construction. Recommended down sizing is as follows: Without Transom Bar 3...:

Are Graintech doors available with GrainTech on one face and standard panels on the others face?

Resolution: GrainTech® doors are not available with different finishes on the inside and/or the outside door panels. Both panels must match.Standard GrainTech® finishes include:BirchAshOakMapleM...:

Where is the EPT location of a Pin-and-Barrel Continuous HInge?

Resolution: The 600/700 Series EPT Template shows recommended locations based on the standard sizes, The customer can provide a different dimension measured from the top of the hinge to the Cen...:

Where is factory recommendation for location of an EPT?

Resolution: EPT installation guidelines are as follows: Recommended location is 6" below top hinge per template Steelcraft will locate the power transfer prep at the Von Duprin re...: