Standard falcon key blank

RELATED FAQS

Question
Answer
Falcon Standard Bitting Specs - 018 system Falcon Restricted Bitting Specs - 025 system
Schlage does not recommend cutting the L or LP section key blanks in the field.  Below are some details.Non Primus:In the classic family of keyways the "L" key section is the highest level key...
Part numbers listed below:
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system.  A keyway name may be shared between the two key fami...
The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section.
A PO from a distributor with a letter of authorization from the end user.
Falcon D series deadbolts will not accept Schlage Key-in-lever cylinders. The faceplate plug hole is smaller in diameter than the Schlage plug and does not fit flush when i...
For a Schlage "C"  keyway:  Specify "CP6" as the cylinder suffix when ordering  D100 or D200 locks (All other Schlage keyways are not available).
 See tables below for available punches.   KEY SECTION  BLUE PUNCH   Everest S*, C*, & Classic/Obverse*  40-075   Everest T* & ...