solenoid for schlage

RELATED FAQS

Question
Answer
Applies to L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EU The Schlage electrified L-Series wiring diagram can be found here and...
Applies to L9080EL/EU. L9082EL/EU (Discontinued) The Schlage electrified L-Series wiring diagram can be found here and the requirements are listed below.      ...
Click here to show the differences of an installed lockcase between the L9090, L9091, L9092, L9093, L9094, L9095 EL/EU and the L9080 EL/EU
The replacement solenoid for the Schlage L-Series mortise lock is part number L283-053.
That is the E996 Solenoid.  It is sold as part 050814-00.To replace the solenoid, refer to the E996L Installation instructions.The trim must be removed from the door.Verify if the tr...
24 volt version draws 90 mAmps (0.090A). 120 volt version draws 30 mAmps (0.030A).
The following could cause the Von Duprin CX solenoid ( devices shipped prior to 8-24-2015) to pull and drop and sound the alarm with solid LED light. Wrong power supply, requires Von Duprin ...
The following could cause the Chexit solenoid ( devices shipped prior to 8-24-2015) pulls in then drop out with no alarm. Mechanical adjustment such as vertical rods. Disconnect t...