It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system. A keyway name may be shared between the two key fami...
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces
DESCRIPTION
PART NUMBER
Conventional Core
23-030
Conventional Core less logo
23-031
Primus Core
20-740
Primus XP Core
20-740-XP
Primus Core less logo
20-741
...
On ND locks manufactured on or after January 30, 2017 only the SFIC lever and SFIC driver are needed to convert the lock from Full Size conventional (PD) or Full Size IC (JD, RD, TD) prep to S...
On ND locks manufactured prior to January 30, 2017, the lever, spring cage and tailpiece needed to be replaced with the SFIC lever, SFIC spring cage and the SFIC driver . N123-056 - Outside sp...
The minimum stile and rail dimensions with glass trim are as follow:
Top Rail:
6 1/4" top of door to exposed glass or
5 1/2" top of door to cutout
Center Rail:
6 1/2" exposed gla...
UL437 is testing requirement that cylinders pass both a timed cylinder pick test and a forceful core/cylinder pull test. We have various cylinders to meet this need, please reference our price boo...
The RU lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied. The tailpiece will come with the lock.
Example: RU581J IC-SC
Choose the appropriate full size control key from the selection below.
Classic Conventional Key Blanks and Cut Keys
Part Number
Description
Key Blanks
35-056
Control
Standard bow, embossed both sides
35-076
Standard bow, unembossed both s...
There are two parts that can be referred to as control pins for a 23-030 (FSIC core).C603-967 is the lower control pin that sits in the seventh hole of the FSIC plug. (part B in exploded view) ...
The T lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied (including the tailpiece)
Example: T581J IC-SC
This only applies to the full size interchangeable cores. The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed).
Simply add (-ICX) to the end o...
A lock specified by a cylinder suffix BDC will be supplied with a disposable small format construction core, see Figure 1 below. There is no metal key but instead the BDC cylinder has a ...
A small format disposable core is used as a SFIC construction core that is for low security applications and can be thrown in the waste bin after use.
The "C" indicates small format IC core, which is the only core style Falcon products. The C987 will be provided less core unless -6, or -7 suffix is specified (6 or 7 pin core)
Example:...
The following list of cylinders were not affected by the change to modular cylinder:
09-900, 09-904, 09-905, 09-907 mortise cylinder turnsSmall format interchangeab...
Use the cylinder suffix 'T' for full size interchangeable core or the cylinder suffix 'HD' for small format interchangeable core, see Figure 1. Small format also has a disposable core option ...
The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core). The tailpiece shown below is used for bo...
The Schlage rim cylinder lengths are given below and were measured from the face of the cylinder to the back of the tailpiece. Because of allowable tolerances for each part the average length is l...
The Schlage AL-Series SFIC locks require one (1) small format spacer (D500-000) for 7-pin cores and two (2) small format spacers for 6-pin cores. When these spacers are not ins...
2021 Update:
An updated version of this knowledge entry can be found by clicking HERE.
Part numbers for Schlage and Falcon cylinders for Von Duprin device...
FALCON
Mortise
Rim
KIL
Conventio...
If unclear whether mortise, rim, or key-in-lever is needed, reference links below to determine what cylinder type is needed.
In order to determine cylinder type n...
The current tools, pinning kits and key originating machines for all Schlage Everest full size cylinders and small format cores are the same used on Everest 29.
Specify the J cylinder suffix followed by IC-CR6 or IC-CR7 (6 or 7 pin Corbin core)
Example: T581J IC-CR6
This will accommodate an 8000 or 8000-7 Corbin Russwin Full Size core.
Only the Schlage ND-Series can be prepped to accept non-Schlage cores.
All designs are supplied with the appropriate tailpiece
Non-Schlage cores are NOT included
Lever designs available vary d...
Full Size Interchangeable Core, a large format cylinder core that can be removed from one housing and placed into another lock without removing or disassembling the lockset/door hardware.
Schlage offers a comparable cam to the Yale 2160 and it will operate any Yale lock that utilizes the Yale 2160 cam.
Schlage Cams for Yale 2160
Part Number
Description
B520-7...
The ND85/AL85/A85 hotel lock is only available in a conventional Key-in-Lever cylinder. Interchangeable core and Primus are not available with this function.
A Primus Hotel cylinder (as well as an IC hotel cylinder) is not possible because there isn't enough room inside the cylinder for all of the required components.
A control key is required to install or remove an interchangeable core from a housing or lever. The control key is identified by having "CONTROL" stamped on the bow. How to install and remove an i...
The letters GD, HD, BD, or BDC should be put after the lock function. EXAMPLE: ND53BD
GD = Schlage SFIC core
HD = Construction core
BD = Less core
BDC = Plastic temporary construction core
The Schlage B and BD cylinder suffixes designate less small format interchangeable core (SFIC) cylinder prep for the lock. Any SFIC, 6-pin or 7-pin, can be inserted into the lock and will operate t...
Schlage is pleased to announce in January 2012 the addition of small format interchangeable core (SFIC) and full size interchangeable core (FSIC) to our CS210 interconnected lock series.
Clic...
(Small Format Interchangeable Core is a small format cylinder core which can be removed from one housing and placed into another lock without removing or disassembling the lockset/door hardware.
A lock is any device which prevents access or use by requiring special knowledge or equipment. Mechanical locks are mechanical devices which secure an opening by keeping a door closed until a relea...