Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Single Door With Actuators And Card Reader ”

Resolution: When a CX99L-BE is not armed the exterior 996L BE lever trim will be free to retract the CX latch for entrance. When the CX99-L BE is armed the exterior 996L BE lever will not move and...:

What power supply do I need for my 2 QELA devices with LCN auto operator?

Resolution: Use the PS902-2RS power supply with LCN auto operator on single door, PS904-2RS power supply on double door and PS904/906-2RS-2RS for 2 pair of QELA is required for basic operation with a...:

What would cause a 4600 operator to click a few times when the actuator is pushed, but not open the door?

Resolution: If a 4600 clicks, but won't open the door: Verify proper connection of all the control box connectors. Verify correct manual operation of door. Verify actuator connections and any strike/maglo...:

What are the ANSI recommendations for the actuator mounting height and distance between the wall actuator and the door opening?

Resolution: Always check the most current revision of the ANSI A156.19 standard for recommendation or requirement of the location of a Knowing Act switch. 2019 ANSI A156.19 states the requirement of the ...:

What would cause an EL device to pull and release?

Resolution: If your Von Duprin EL (solenoid) device pulls and releases quickly instead of holding the latch retracted, please check all of the items below.In most cases, one or more of these solutions will r...:

Will the 8310-853 actuator mount in a single gang or a double gang box?

Resolution: The 8310-853 (T) series actuator will mount to either a single or double gang electrical box.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Single Door With Actuators And Card Reader ”

RELATED FAQS