SFIC thick door driver

RELATED FAQS

Question
Answer
Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately. If an extended tailpiece is needed, then a complete lock will need to ...
B500 with standard cylinders How to order with the deadbolt: Door thickness over 1 3/4" to 2 1/4", specify door thickness when deadbolt is ordered Door thickness greater than 2 1/4" will req...
The small format core throw member for the AL locks is C604-381.
There are several part numbers available: Part Number Contents 09-774 SFIC driver & Spacer N523-091 SFIC driver D500-000 Spacer
The Schlage SFIC rim cylinder driver is part number B520-365, shown below.     Figure 1: SFIC Rim Cylinder Housing
Issue:  Schlage SFIC mortise cylinders have potential for the driver pins to fall out affecting the ability to lock and unlock the device.Facts: Housings manufactured between 06/01/2...
ND locks can be extended up to 6" Extended Outside.  
The B600 (standard cylinder only) can be be specified for 1 3/8" thin doors and the appropriate parts will be supplied.  Interchangeable cores are not available for 1 3/8" thin doors.
The outside housing, B600-089, can be ordered to retrofit an existing standard cylinder B600.Description: 1 1/8” Collar (trim ring) for 1 3/8” – 1 5/8” door