Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ SFIC cylinder housing ”

Resolution: Issue: Schlage SFIC mortise cylinders have potential for the driver pins to fall out affecting the ability to lock and unlock the device.Facts: Housings manufactured between 06/01/2...:

What cylinder and cam is used with the 650 series keyswitch?

Resolution: If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions. Blocking RingSpecify Dimension 1//8" 012 3/16"&nb...:

What is the M504-413 tool used for?

Resolution: See attachment that describes this tool.:

Will the SFIC mortise housing accept both six and seven pin cores?

Resolution: Yes. Both Schlage and Falcon SFIC mortise housings will accept 6 and 7 pin cores with no additional parts.:

Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?

Resolution: The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.:

How to order the mortise full size interchangeable core with a construction core.

Resolution: This only applies to the full size interchangeable cores. The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed). Simply add (-ICX) to the end o...:

Does Schlage offer a Rim cylinder FSIC housing less core?

Resolution: Rim cylinder housing only for SFIC is part number 80-129.:

What is the part number for the SFIC rim cylinder driver?

Resolution: The Schlage SFIC rim cylinder driver is part number B520-365, shown below. Figure 1: SFIC Rim Cylinder Housing:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ SFIC cylinder housing ”

RELATED FAQS