Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ senior swing opening adjustment ”

RELATED FAQS

Resolution: The Senior Swing Series used to have a 2 gearbox options, a "standard force" (15 lbs) and a "RF - reduced force" (11 lbs). In November 2009 RF option was eliminated and we made the standard sr...:

What would cause a Senior Swing to open too far?

Resolution: The Senior Swing operator is designed to power open the door to 90°. The built in dead stop (in the gearbox) prevents it from opening any further. If the Senior Swing operator is opening to far (pa...:

Can I get a Senior Swing with a reduced opening force gearbox?

Resolution: The older model Senior Swing came with 2 spring options. The "standard force" spring required 15 lbs of manual opening force, and reduced force "RF" required 11 lbs of manual opening force. All S...:

What are the minimum header lengths for a Senior Swing?

Resolution: The minimum header lengths for a Senior Swing with standard Spindle centers are:Concealed 2810 Series:2811 single door (offset pivot or butt hinge) -- 33".2811 single door with stop (cent...:

What causes a Senior Swing door to hang open and not close?

Resolution: First, turn off the power to the Senior Swing. If the door closes, check controller for a constant activation signal from an activation device. If door continues to hang up and will not close...:

What would cause a Senior Swing to open only 10 degrees and then close?

Resolution: Issue/Symptom – upon receiving an activation input the Sr Swing gearbox opens only about 10 degrees and then returns to the close position. Unit will never learn opening nor function pro...:

When did we start shipping the Senior Swing, Benchmark, and Falcon operators with the ES Filter?

Resolution: On the Benchmark, if there is line noise from a strike then the unit will lose it's hold open time. Adding the ES Filter, which is a diode, will resolve this issue and the unit will hold it's...: