Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ schlage rim cylinder template ”

RELATED FAQS

Resolution: All the templates can be found at us.allegion.com Please click here :

Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?

Resolution: The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.:

Does Schlage offer a Rim cylinder FSIC housing less core?

Resolution: Rim cylinder housing only for SFIC is part number 80-129.:

What is the length of a Schlage rim cylinder?

Resolution: The Schlage rim cylinder lengths are given below and were measured from the face of the cylinder to the back of the tailpiece. Because of allowable tolerances for each part the average length is l...:

What is the part number for the Schlage thumbturn rim cylinder?

Resolution: The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:

What is the part number for the Schlage small format rim cylinder tailpiece?

Resolution: B502-899 is the tailpiece for both the SFIC and standard rim cylinders.:

What is the maximum door thickness a Rim cylinder can fit on?

Resolution: For total thickness measurements larger than 3 inches see the special cylinder offerings in the Schlage Pricebook. Specify the part number and include the total thickness. We do no...: