Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ schlage parts manual ”

RELATED FAQS

Resolution: To convert the AL44 to an AL40 you can replace the outside plunger unit in the chassis or order the AL40 chassis. Replacing the plunger unit is more difficult and time consuming and would not be r...:

Can the low coin cell Nuisance delay be Disabled on a CO200?

Resolution: The coin cell is ignored when the lock sets are used with Manual Programming ONLY or while in Construction mode.:

Old 1981 Schlage Lock Service manual.

Resolution: The 81 service manual can be found here.:

When are Panic Devices required?

Resolution: The use of Panic Hardware and/or Fire Exit Hardware is required by the International Building Code (IBC) and NFPA 101 – The Life Safety Code, depending on which code and which edition of the code i...:

Is the Schlage Latitude and Longitude lever available in a stainless steel finish?

Resolution: Beginning January 2, 2013 Schlage will offer the Latitude (LAT) and Longitude (LON) levers in the 629 and 630 stainless steel finishes.:

Will a Medeco key-in-lever cylinder fit into an ND lock?

Resolution: Medeco does offer a key-in-lever cylinder to fit the Schlage ND. You will need to contact Medeco for the cylinder Specify a key-in-lever cylinder to fit the Schlage ND lo...:

Does Schlage offer ND conversion kits to convert to Classroom Security function?

Resolution: For all available ND Series Conversion Kit part numbers, click here.:

What backsets are available on Schlage and Falcon locks?

Resolution: SCHLAGE locks are available with the following backsets: Lock Series Lock Type ...:

Does Schlage or Falcon manufacture a stainless steel cylindrical or mortise lock?

Resolution: Schlage does not have a stainless steel/non-ferrous lock series. The only option that Allegion provides is the Grade 1 cylindrical Falcon X-Series. To order the Falcon X with the stainless st...:

Are there any instructions for Von Duprin device maintenance?

Resolution: Please see the Maintenance Kit Manual for information on device lubrication as well as complete breakdowns and parts lists for Von Duprin exit devices.Exit devices and latc...:

Where are the part manuals for Falcon exits?

Resolution: Falcon (19. 24, 25, and XX) parts manuals for Exits are downloadable on the :

Repalcement parts for Schlage Electronics 672 TouchBar and 692 SmartBar

Resolution: See attached table: Schlage 692/672 Parts Cross ref:

What does the cylinder suffix BDC mean?

Resolution: A small format disposable core is used as a SFIC construction core that is for low security applications and can be thrown in the waste bin after use.:

Can you convert the 510 L trim to an L-NL (storeroom) function?

Resolution: The 510L can be converted to a nightlatch 510L-NL by changing out a few parts to the trim. See 510L to 510L-NL conversion instructions for required parts that will need to be added/r...:

Do the electric removable mullions come with a quick connector?

Resolution: The Von Duprin electrified steel mullions, 4854 and 9854 come with a quick connector that connects the electric strike wires from the mullion to the frame through the top fitting. ...: