Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
Schlage H series lock design change
”
RELATED FAQS
Question
Answer
Was the H lock design changed to include the B500 deadbolt?
Resolution:
As of May 23rd, 2011 the H lock utilizes the B500 bolt. If the deadbolt is being replaced for an existing lock, the linkage and housing will change as well. The new linka...:
What T lock improvements were made in May 2013?
Resolution:
In mid-May 2013 the Falcon T-Series changed the slide and catch spring used in the chassis to improve overall durability.:
Did the H-Series deadbolt and linkage change?
Resolution:
As of May 23, 2011 the Schlage H-Series is assembled with the Schlage B500-Series deadbolt and a new linkage. If the deadbolt is being replaced for a lock manufactured prior to May 23rd, 2011...:
What is an interconnected lock?
Resolution:
Interconnected Locks: a lockset whose trim provides a means of simultaneous retraction of two or more bolts which may also be operated independently Medium duty Commercial, government or multi-...:
What size is the Schlage H escutcheon?
Resolution:
Schlage H-Series Escutcheons Part Number Description Dimension 07-057 Inside escutcheon and turn 6.92" x 2.75" 07-035 Inside escutcheon, dummy - H170 6.92" x 2...:
Are the Schlage H series knobs sold separate?
Resolution:
The knobs are available, part numbers listed below. 01-008 for a closed knob 01-009 for open levers 01-018 for cylinder knobs, LEV lever design not available in 01-018 01-026 for FSIC Specif...:
Why can't a new spring cage or driver be installed on an older AL lock?
Resolution:
In 2002 the Schlage AL-Series underwent a design change that affected the spring cage, driver, and plastic insert. Spring cage and driver replacements for AL locks manufactured before this design ...:
D73 locking issues with push button.
Resolution:
A design change occurred in 2001 to address a locking/unlocking issue with the discontinued D73 lever locks. This included modifying the cam and plug, spindle and using a different plung...: