Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Schlage Encode Screw Pack ”

RELATED FAQS

Resolution: The 9530-MS screw pack is the Sr. Swing Pull Arm Screw bag and it includes; roller (1), MS (2), WS (2), Hex cap arm screw (1), washer (1), and rivet nuts (2).:

Is there a thick door kit for the B500 deadbolt?

Resolution: B500 with standard cylinders How to order with the deadbolt:Door thickness over 1 3/4" to 2 1/4", specify door thickness when deadbolt is orderedDoor thickness greater than 2 1/4" will require...:

What is the part number for the 1460 cylinder mounting bracket?

Resolution: The part number for the 1460 cylinder mounting bracket is: 1460-30A.At the end of August 2016, this mounting bracket is packed in the closer Screw Pack. Please note it used to be shipped loos...:

What is in a 23538812 Tamper Torx Screws for AD-Series Cylindrical Locks screw pack?

Resolution: (4) SCREW, TORX, T-15, #8-32 UNC 2A, UNDERCUT, FLAT HD, MACHINE, 1/2" LENGTH (2) SCREW, TORX, T-20, #12-24 UNC 2A, UNDERCUT, FLAT HD, MACHINE, 1/2" LENGTH (2) SCREW, 8-32 X 3/4 MS PIN TORX (1)...:

What are the part numbers for the mounting posts and screws for an L9000 lock?

Resolution: Mounting Posts Part Number Door Thickness L583-211 1 3/8" L583-212 1 3/4" - See note section on SL1 trim L583-213 2...:

What are the SRT screws lengths used with LCN Closers?

Resolution: SRT "Self Reaming, & Tapping" screws are the default type screws shipped with LCN closers, when a specific screw type is not specified. There are 3 standard lengths of SRT screws: 1-3/8" 1...:

What is in a 23538820 Tamper Torx Screw Pack for AD-Series Mortise Locks?

Resolution: (2) SCREW, TORX, T-15, #8-32 UNC 2A, UNDERCUT, FLAT HD, MACHINE, 1/4" LENGTH (2) SCREW, TORX, T-20, #12-24 UNC 2A, UNDERCUT, FLAT HD, MACHINE, 1/2" LENGTH (2) SCREW, 8-32 X 3/4 MS PIN TORX (1)...: