Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Schlage ad stile width ”

Resolution: The minimum recommended Stile measurement is 5” to allow proper mounting of the AD and CO series locks.:

What is the minimum dimension from the edge of the door to a glass light cutout?

Resolution: Minimum dimensions to cutouts for glass lights: Vertical edge of door to edge of cutout = 5 29/32" Top of door to top of cutout = 6" Bottom of door to bottom of cutout = 10" Reinforcing chann...:

What are the minimum stile and rail dimensions for the L-Series door FG, FG2 & FG3?

Resolution: The minimum stile and rail dimensions are to exposed glass are: Stiles = 6 13/16" Top Rails = 6 3/4" Center Rails = 7 1/2" Bottom Rail = 10 3/4" For high traffic and high abuse locations th...:

What electric strikes are available for Von Duprin rim exit devices?

Resolution: The 22, 33/35A and 98/99 rim exit devices: The 6111 is the most common electric strike to be used with these devices 6112 and 6113 electric strikes also could be used The 6300 surface mount el...:

Can you use the 6300 with the 33A/35A device?

Resolution: You can use the surface mounted 6300 electric strike with 33A/35A rim exit device as long as you have enough stile width for this strike.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Schlage ad stile width ”

RELATED FAQS