sargent LA keyway

RELATED FAQS

Question
Answer
Falcon D series deadbolts will not accept Schlage Key-in-lever cylinders. The faceplate plug hole is smaller in diameter than the Schlage plug and does not fit flush when i...
For a Schlage "C"  keyway:  Specify "CP6" as the cylinder suffix when ordering  D100 or D200 locks (All other Schlage keyways are not available).
The "C" indicates small format IC core, which is the only core style Falcon products.  The C987 will be provided less core unless -6, or -7 suffix is specified (6 or 7 pin core) Example:...
A PO from a distributor with a letter of authorization from the end user.
The part number is 48-102 C, you will need to specify the cuts.
The 914KIL-IC trim is shipped with a Small format interchangeable core (SFIC) in a 6 pin "A" section/keyway.  A comparable core from Falcon would be the C646 (uncombinated - no pins) or C...
The profile or shape of the key is different.  This would apply to all key sections with differing names such as F, CE, etc.
Split key systems are delivered in the highest level section on the key tip (insert): L - obverse or classic Y - reverse 0000 - Paracentric ZZZZ - Quad D000 - restricted Everest C000 - open...
ILCO is a manufacturer that uses SC as a designation to represent Schlage keys.  ILCO is not affiliated with Schlage so a key with an SC designation was never manufactured by Schlage. The followin...
The chart below outlines the hierarchy of the Everest C sections.  The bottom row (C134, C145, C135, C125, C124, C123, C234, C235, C245, C345) are available in a cylinder and key...