Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rx switch installation ”

RELATED FAQS

Question
Answer
What are the Von Duprin part numbers for RX, LX and RX,LX-LC switch kits for field installation?
The attached table shows the part numbers for LX-RX and LX-RX-LC switches field installed.
Does the ND lock have an RX option?
The ND lock is available with an RX option:When ordering a complete ND lock specify RX when the request to exit (RX) switch is required.The ND80EL, ND80EU, ND96EL, ND96EU, ND12EL, ND12EU electrifie...
Is the RX black plug replaceable on Chexit device?
You must replace the entire RX switch assembly for Chexit devices shipped after 8-24-2015 with motor driven.
The part number for the RX switch pig tail (black plug) with two orange wires only for Chexit devices shipped prior to 8-24-2015 with solenoid driven is 991338-00. 
Can a 55 or 88 series device have a request to exit switch?
The Request for Exit (RX) is available on the 55 and 88 Series Von Duprin devices.The RX switch is installed in the end case of 55 and 88 series exit devices.There is no kit to field install the RX...
Can the Von Duprin RX Switch be installed on an existing Falcon Monarch 19?
The devices baseplates/scissor assemblies are different and will not accept the Von Duprin RX switch.
Does the Von Duprin ALK require the RX switch to operate?
The RX switch is required to activate the ALK. The RX switch monitors the pushbar and will signal the ALK to go into alarm when the pushbar is depressed. The RX switch also allows free in...