Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ RX SPDT Switch ”

Resolution: For Chexit devices with solenoid driven shipped from the factory prior to 8-24-2015, the RX switch is ordered as a "Special CX RX Switch". It may only be installed or adjusted ...:

Does the Von Duprin ALK require the RX switch to operate?

Resolution: The RX switch is required to activate the ALK. The RX switch monitors the pushbar and will signal the ALK to go into alarm when the pushbar is depressed. The RX switch also allows free in...:

What is the wire gauge on the motor driven L9000 mortise locks?

Resolution: Supply wires - 24AWGRX wires - 20AWGLX wires - 20 AWG:

What degree of lever rotation is required to operate the RX feature?

Resolution: The RX switch is activated at approximately 18 degrees of lever rotation. :

What type of switch is used for the RX and latch monitoring options for the ND and L locks?

Resolution: The ND-Series RX, the L-Series RX and latch monitoring switches are Form C - Single Pole Double Throw (also known as SPDT).:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ RX SPDT Switch ”

RELATED FAQS