Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
rubber tip door stop tip
”
RELATED FAQS
Question
Answer
What is the part number for the rubber tip for an Ives hinge pin door stop?
Resolution:
Model 69 the part number is 09-310Model 70 & 73, the part number is WSPART.1075:
How do I get service on my Astro Swing operator that isn't working properly?
Resolution:
LCN does not does not have or supply any information for the old (obsolete) "High Energy" Dor-O-Matic Sliding doors, Bi-Fold doors or Astro Swing doors. You MUST be AAADM certified to work on, or g...:
What is the AL Jupiter lever return to the door?
Resolution:
1.20 inches:
What is the size of the Levon lever in the A series?
Resolution:
The door face to lever tip distance is 1 3/8":
What is the door-to-lever tip distance on the S Jupiter lever?
Resolution:
The lever return distance (tip of lever to door face) on the Jupiter lever design is approximately 1-3/4".:
Door hitting the strike jamb?
Resolution:
If the door hits the frame (or rubs on the rabbet of the head or jamb) the frame is out of square and improperly installed. Door edge rubbing on the rabbet - shimming the hinges may resolve the...:
Does the Ives 482 Door Guard come with a rub plate?
Resolution:
The Ives 482 does not come with a rub plate. The brass 482 Door guard (also called 482B) comes with an edge guard or plate that is applied with adhesive to protect the edge of the door.T...:
What wire gauge and run is recommended for Von Duprin electric latch retraction EL device?
Resolution:
: