Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rod guard for top rod ”

RELATED FAQS

Resolution: The RGO (rod guard only) is 36" long x 1-5/8" wide.:

Resolution: RGO, RG-27, RG-27-3 , RG-27-4:

What would keep the vertical rod exit devices top latch from being held retracted in the open position?

Resolution: Following exit devices 2227/F, 33/3527A/F, 33/3547A/48A/F, 98/9927/F and 98/9947/48/F have similar rod adjustment procedures. All top latches control the bottom latch assemblies. When do...:

Can the old style 3327 top latches and rods still be purchased?

Resolution: The old style Von Duprin 3327 top latches and rods are no longer available. The part number for the old 3327 top latch was 105339.:

Why is the 2390 top latch not staying retracted when dogged?

Resolution: Most likely need to length the top rod so latch can engage it's internal latch retention state. See 2390 Instructions for adjusting rod lengths.:

Can I order a "one piece" top rod for an 8827 for a 9' door?

Resolution: 8827 vertical rod device is available for 7 or 8 feet tall door standard. 12", 24", 36" and 48" extension rod kits are available for taller doors (8 feet max on fire rated openings). We do no...:

Can the 9927 exit device be installed Less Top Rod?

Resolution: The top rod is required for proper operation. The top latch controls both the top & bottom rods and without the top latch/rod the bottom latch would release when pushpad or trim was used but then ...:

Are 1 piece top rods available for a 24V or 25V device?

Resolution: As of August 3rd, 2011 this is no longer an option.: