Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Rod guard for monarch ”

RELATED FAQS

How long is the RGO?

Resolution: The RGO (rod guard only) is 36" long x 1-5/8" wide.:

Where is the template for the 718 trims made after 2/28/2011 for Falcon/Monarch concealed vertical rod devices?

Resolution: Templates for current 718 series trim can also be found on Falcon website:

Are 1 piece top rods available for a 24V or 25V device?

Resolution: As of August 3rd, 2011 this is no longer an option.:

What is the part number for the former F588 from Monarch?

Resolution: The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588.:

Why should you use the LX switch with an ALK being used in Von Duprin surface vertical rod devices?

Resolution: An RX switch would only trigger the ALK Alarm Kit when the pushpad of the device is depressed.Surface Vertical Rod (SVR) Devices such as the 2227, 33/3527A, 98/9927, and 98/9957 devices could be op...:

Can RG-27 be used on a top rod?

Resolution: Yes, you could use the RG27 on top rod but we recommend RGO. The RG27 is a latch and rod guard and the RGO is a rod guard only. A latch guard is not needed for top latch, only for bottom latch.:

What is the Falcon cam designation for use on 25 series trims?

Resolution: For standard (non-IC) cylinders, use the Falcon #4 straight cam For IC cylinders, use the Falcon #5 cam :

What strike is required when using the 2670 Guard-X on a pair of doors?

Resolution: With a mullion: Use the standard strike 267 With no mullion and inactive leaf being held closed with flush or surface bolts: Use the 2609 double door strike :