Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rim cylinder FSIC tailpiece ”

Resolution: Rim cylinder housing only for SFIC is part number 80-129.:

Which way is the tail piece of the rim cylinder is inserting into the Von Duprin 98/99 rim device from 996L trim?

Resolution: The tailpiece of the rim cylinder can be inserted into the Von Duprin 98/99 rim device either vertical or horizontal (using the tailpiece guide).:

Can you use a new 812L on an old bar that had a 182L?

Resolution: The current 812L trim will replace the older 182L trim. Due to the thicker escutcheon plate of the 812L trim a 1 1/2" mortise cylinder with straight cam for mortise devices or a longer rim cylinde...:

Can the 88 device be ordered as NL-OP?

Resolution: You would have to order the device as 88NL less trim, the device will be shipped as an 88EO. The EO device has an NL cam to accept a rim cylinder tailpiece. :

What is the length of a Schlage rim cylinder?

Resolution: The Schlage rim cylinder lengths are given below and were measured from the face of the cylinder to the back of the tailpiece. Because of allowable tolerances for each part the average length is l...:

What is the part number for the Schlage small format rim cylinder tailpiece?

Resolution: B502-899 is the tailpiece for both the SFIC and standard rim cylinders.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rim cylinder FSIC tailpiece ”

RELATED FAQS