Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rim cylinder for falcon exit ”

Resolution: The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:

What cylinder is used in the Falcon 24/25 exit alarm kit?

Resolution: The Exit Alarm takes a 1 1/8" Mortise cylinder with a straight cam. See first page of Exit Alarm inst below. Exit Alarm inst:

Do the Falcon exit devices have the double cylinder option?

Resolution: A double cylinder(-2) option is not available on a Falcon device but is available from Von Duprin.:

Which way is the tail piece of the rim cylinder is inserting into the Von Duprin 98/99 rim device from 996L trim?

Resolution: The tailpiece of the rim cylinder can be inserted into the Von Duprin 98/99 rim device either vertical or horizontal (using the tailpiece guide).:

How do I order an 88 rim to accept NL cylinder and pull by others?

Resolution: Order the device as 88 NL less trim. The cylinder will be mounted to the face of the door. Use templates 10156 and 40015.:

Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?

Resolution: The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.:

What cylinder does the 512 TP NL use?

Resolution: A 1-1/8 through 1-1/2" mortise cylinder with straight cam per Step 4 of 512NL Instructions.:

Does Schlage offer a Rim cylinder FSIC housing less core?

Resolution: Rim cylinder housing only for SFIC is part number 80-129.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rim cylinder for falcon exit ”

RELATED FAQS