Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ RIM CYLINDER BODY LENGTH ”

Resolution: The Schlage rim cylinder lengths are given below and were measured from the face of the cylinder to the back of the tailpiece. Because of allowable tolerances for each part the average length is l...:

Which way is the tail piece of the rim cylinder is inserting into the Von Duprin 98/99 rim device from 996L trim?

Resolution: The tailpiece of the rim cylinder can be inserted into the Von Duprin 98/99 rim device either vertical or horizontal.:

How do I order an 88 rim to accept NL cylinder and pull by others?

Resolution: Order the device as 88 NL less trim. The cylinder will be mounted to the face of the door. Use templates 10156 and 40015.:

What cylinder is used for the Von Duprin -2 double cylinder function?

Resolution: The 98/99 rim device can be converted to double cylinder 98-2 or 99-2.Double cylinder features an inside key cylinder which locks or unlocks the outside trim (Classroom Function) and an&n...:

What is the tailpiece and driver part number for the 20-057?

Resolution: The B220-001 is an FSIC rim tailpiece and driver.:

What cylinder does the 512 TP NL use?

Resolution: A 1-1/8 through 1-1/2" mortise cylinder with straight cam per Step 4 of 512NL Instructions.:

Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?

Resolution: The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.:

Does Schlage offer a Rim cylinder FSIC housing less core?

Resolution: Rim cylinder housing only for SFIC is part number 80-129.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ RIM CYLINDER BODY LENGTH ”

RELATED FAQS