Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ replacement parts for l-series ”

RELATED FAQS

Question
Answer
What are the part numbers for the mounting posts and screws for an L9000 lock?
 Mounting Posts   Part Number  Door Thickness  L583-211  1 3/8"  L583-212  1 3/4" - See note section on SL1 trim  L583-213  2...
Why does the lever on my T lock lever droop?
Issue: One or both levers don't stay horizontal and droop down.Facts: Falcon T series locks in a high use application.Cause: Weak or broken springs within the springcage.Solution: Replacement sprin...
What is the L Series inside lever mounting plate part number?
The inside lever mounting plate part number is L283-031.
What is the part number for the L lock solenoid?
The replacement solenoid for the Schlage L-Series mortise lock is part number L283-053.
Repalcement parts for Schlage Electronics 672 TouchBar and 692 SmartBar
See attached table: Schlage 692/672 Parts Cross ref
What took place of the 3140 strike?
The Von Duprin 3140 electric strike is discontinued and the direct replacement is 6211 electric strike.
When was e.Primus discontinued?
e.Primus was an electronic lock system that used iButton credentials to unlock a door.  Product was discontinued in July of 2002 with parts were available only for a short time.  Product support fo...
The plug on my CIP Module is broken
The miniature banana plug on the module can be ordered directly from the part manufacture (Pomona Electronics, Sales: 900-490-2361 part number model #4513) or from (Digi-Key part number 501-1425-ND).
What is the part number for the 6210 spring and lip replacement package?
You can replace the 6210 spring and lip, part number 050940-00.
What are the part numbers for the inside and outside knobs for the L series?
Inside knob and bushing: 09-402 plus design and finishOutside knob: 09-401 plus design and finish
Does LCN sell replacement parts direct to customers?
LCN does not sell direct. LCN only sells through it's Distributors and Dealers. They would need to contact a Distributor/Dealer in their area. 
What is the part number for the L series handing screw?
Screw part number is L583-485.  Screw type: 8-32 UC-2A W/#6 Flat truss head Phillips recess, header point.
Replacement BNC Cable for SNAP Programmer
A replacement BNC cable has been found through the manufacturer, E-Z Hook.  This company makes electronic testing equipment, and this cable is believed to be a good working replacement fo...
This product is obsolete and is no longer available from Schlage Electronics.