Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ replace exit hardware and replace with lever? ”

Resolution: To convert the Von Duprin 98/99 Rim or Vertical (Rod or Cable) Exit Device with functional lever (996L-R/V) to act like a rigid lever (996L-NL-R/V) with key over ride follow these steps: R...:

What power supply replaces the Von Duprin 9VDC PS9 power supply?

Resolution: The PS9 power supply was discontinued. The new exit alarm ALK can either use a 9VDC battery or 24VDC regulated power supply. There is no direct replacement for Von Duprin PS9 power supply. Cur...:

Can the Von Duprin 996L lever handle be replaced with a new one?

Resolution: Yes, Von Duprin 996L lever handle can be replaced with a new one . Attached installation instructions shown how to replace the existing lever handle on 994/996L trim for rim and vertical rod device...:

Can danmark lever designs be used on Von Duprin Exit Device trims?

Resolution: Von Duprin does not offer any of the danmark lever designs by Schlage.:

What is the difference between Panic Hardware and Fire Exit Hardware?

Resolution: The most obvious difference (in the device) is the lack of mechanical dogging on a Fire Rated Device. There are some internal parts that may be different and the method it is secured to the d...:

When are Panic Devices required?

Resolution: The use of Panic Hardware and/or Fire Exit Hardware is required by the International Building Code (IBC) and NFPA 101 – The Life Safety Code, depending on which code and which edition of the code i...:

Do we offer a lever trim with squared top and bottom for the 98/99 series exit devices?

Resolution: The Von Duprin 994L series trims were square on top and bottom. They were discontinued in July 2010.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ replace exit hardware and replace with lever? ”

RELATED FAQS