Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
replace coin cell in co
”
RELATED FAQS
Question
Answer
Can the low coin cell Nuisance delay be Disabled on a CO200?
Resolution:
The coin cell is ignored when the lock sets are used with Manual Programming ONLY or while in Construction mode.:
What type of coin cell is used in the AD / CO Lock?
Resolution:
The coin cell for the AD and CO family of electronic lock products is a 3vdc lithium. CR2025 is the specified part number.:
What is the low battery threshold for the AD and CO Locks?
Resolution:
CO200 & CO250 Disable coin cell Nuisance delay and blink, With CO.A.7 and SUS 4.10.2 or newer for CO200 and CO250, you can use the SUS/HHD, under Lock Properties, Edit, to de-select, DISABLE, t...:
What drains the AA batteries on an CO-Series lock?
Resolution:
Causes for AA battery drain in CO-Series LOCKS - Possible Cause Fix/Corrective Actions One of the four AA batteries was inserted reversed and the reserved battery drains the other batteries. ...:
Does the CO100 have a coin cell?
Resolution:
There is not a coin cell on the CO100.:
Why is there no coin cell battery in my WRI400?
Resolution:
The coin cell battery is not used by the WRI400.:
Why do AD Series offline locks still give a Low Coin Cell indication after I install a new coin cell?
Resolution:
The coin cell part number is CR2025 - 3 volt lithium - available at most battery or electronics stores.:
I replaced the CT5000 coin cell, but I still get a Low Battery indication.
Resolution:
Coin Cell part number is CR2025 - 3Volt Lithium - available at most any battery store.: