Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
removing schlage lever core
”
RELATED FAQS
Question
Answer
Why can't I remove the control key from the core after the core is inserted into the lever?
Resolution:
The lever may be missing the slot feature for the core locking lug. Verify slot is in place.:
How are interchangeable cores installed?
Resolution:
A control key is required to install or remove an interchangeable core from a housing or lever. The control key is identified by having "CONTROL" stamped on the bow. How to install and remove an i...:
What does the cylinder suffix BDC mean?
Resolution:
A small format disposable core is used as a SFIC construction core that is for low security applications and can be thrown in the waste bin after use.:
How do I remove the lever on an M lock?
Resolution:
To remove the M lock trim follow the steps below in reverse. The M lock spanner wrench is 021415. Although this wrench is no longer available from&n...:
Can the AL locks be ordered to accept Corbin Russwin core?
Resolution:
The AL lock can not be ordered to accept any competitor full size core. The ND lock should be used in these applications.:
How do you remove an AL series lever?
Resolution:
See instructions below. :