Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ remove nd lock ”

RELATED FAQS

Question
Answer
What other locks can the blue lever removal tool 24002693 be used with?
The lever removal tool can be used to remove levers in both the ND and the L Series mortise locks.
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project.  This tool can be used for Schlage ND-Series ...
What replaced the old D series lever locks?
The old D series lever lock was replaced by the ND lock in September 2003.
What are the new announced ND-Series features?
ND-series locks manufactured on or after January 30, 2017 will ship with an improved spring cage and matching lever design. The design features are noted below. Because of this change, there a...
NOTE: ND locks manufactured on or after January 30, 2017 will no longer make use of the soft durometer spacer. The improved spring cage and matching lever eliminates the need for this spacer.Schlag...
How long is the ND tailpiece for a thick door?
Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately. If an extended tailpiece is needed, then a complete lock will need to ...
Can an ND lock with SFIC cores be extended to fit a 3" extended outside door?
ND locks can be extended up to 6" Extended Outside.  
When ordering the ND lock less cylinder will it come with a tailpiece?
The Schlage ND is shipped with a driver/tailpiece when ordered with a LD, BD, or JD suffix.
What is the part number for a key in lever tailpiece for the ND lock?
For modular designs: All functions except ND85 the tailpiece part number is N523-022. The ND85 tailpiece part number is N523-123. For non-modular designs: All functions except ND85 the t...