Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ remove al lock from door ”

Resolution: AL-Series and discontinued D Lever-Series locks use castle nuts to hold the chassis to the spring cages and to keep the chassis positioned in the door. This causes confusion at times when the lock ...:

What are the steps to remove an S lock from the door?

Resolution: Remove the inside rose then remove the two mounting screws and the inside and outside chassis will come off the door. See Installation Instructions here.:

How to remove a double cylinder deadbolt?

Resolution: Schlage and Falcon double cylinder deadbolts have concealed screws to prevent tampering. The two methods used to conceal the thru-bolts are using screw caps or a faceplate. Use the below instructio...:

How do I remove an X lock from the door?

Resolution: To disassemble an X lock, remove the inside knob and unscrew the inside collar and rose. The X lock spanner wrench (012172-000-30) can be used to depress the knob catch as well as tighten/loo...:

How do you adjust for door thickness on an AL lock?

Resolution: The standard door range for an AL lock is 1 3/8" to 1 7/8". Using the supplied instruction sheet, align the springcage post to desired door thickness by adjusting the outside castle nut. See inst...:

What parts do I need to convert my AL lock to fit a 2" thick door?

Resolution: Part required by function:2 each A700-043 driver & A700-034** lever insert in addition to the chassis parts below:AL10S – 2 hubs A700-028AL25D – 2 hubs 1 A700-028 (inside), 1 A700-030 (outside)...:

Will the AL lock fit a 2" thick door standard?

Resolution: The AL series lock fits up to 1 7/8” door thickness out of box.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ remove al lock from door ”

RELATED FAQS