Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
recommended weight for continuous hinge
”
RELATED FAQS
Question
Answer
Can a Pin & Barrel Continuous Hinge be cut to size in the field?
Resolution:
Many 600 and 700 Series Pin & Barrel Continuous Hinges can be cut down in the field following the steps provided in the installation instructions to cut the bottom of the hinge. For a sma...:
What is maximum width, height and weight for IVES butt hinges?
Resolution:
Butt hinges can be used on doors up to 4' wide and 200 pounds. There is no maximum door height. However, an additional hinge must be installed every 30" when exceeding a 7' d...:
What hinges can be used on tornado doors?
Resolution:
The following hinges are available on Paladin series doors and frames: Butt hinges - 4 1/2" or 5" ball bearing type either standard or heavy duty Continuous hinges - full ...:
Where is common cutout for Von Duprin EPT prep in Ives 224 Continuous Hinge?
Resolution:
Cutout depends on the size of 224 hinge. See 112HD/224HD-EPT template. 112HD/224HD continuous hinge Center line of EPT to top of the door 83 inches 30 inches 85 inches 32 inc...:
Why is my TWP narrower than my XY hinge?
Resolution:
The TWP is a standard size across the board on continuous hinges.:
Is the material thickness of the 112HD thinner than the 224HD?
Resolution:
No, they are both the same gauge.: