Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
read range ad
”
RELATED FAQS
Question
Answer
What is the read range of the new Schlage MT11 wall mounted reader?
Resolution:
All read ranges are affected by the environment the reader and card are subjected too. The following data was obtained in a relatively "noisy" RF area with the reader mounted on a metal ...:
What is the read range of the Schlage MT11 wall mounted reader?
Resolution:
All read ranges are affected by the environment the reader and card are subjected too. The following data was obtained in a relatively "noisy" RF area with the reader mounted on a metal ...:
Will the Schlage CO or AD trim work with the Falcon 25V device?
Resolution:
The Schlage AD/CO trims are not compatible with the Falcon 25-V device due to the main cam on the device rotating the opposite direction for a given hand compared to the AD/CO trims output dri...:
Is the FMK reader FIPS 201 compliant?
Resolution:
The FMK reader on an AD Series lock is capable of reading PIV and PIV-I credentials, however, alone it no longer complies with the new FIPS 201-2 standard in which the lock with reader (AD-302 and ...:
What card types and formats will our AD and CO proximity readers support?
Resolution:
See attachment for details: Proximity readers support:
What card formats will our AD and CO magnetic swipe readers support?
Resolution:
See attachment for details: Magnetic Swipe reader supports::
What card types and formats will our AD and CO smart readers support?
Resolution:
See attachment for details: Smart readers support::
Can the AD-Series and CO-Series magnetic card credential readers be set to read data from different magnetic card tracks?
Resolution:
Customers will need to use the Schlage Utility Software (SUS) on the HHD lock programming device to set the desired magnetic track to be read for access control, if not using default Track 2&n...:
Why is the battery draining so quickly on an AD-Series lock with a Keypad ONLY (KP) credential reader?
Resolution:
A Technical Note has been generated to document one method of measuring battery current. See the attachment HERE.:
What Proximity technologies do XceedID readers support?
Resolution:
ISOX card technology is no longer supported - contact XceedID sales:
What process should be followed to change the Credential Reader type on a AD-Series lock?
Resolution:
The process to change the Credential Reader on an AD-Series lock is as follows: Note: To ensure firmware compatibility of the lock and reader, it is important that the firmware in the LOCK and the...: