Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rating on RX switch ”

Resolution: The standard Von Duprin switches (RX and LX switches in exit devices, and DS dual switches in 6100 and 6200 Electric Strikes) are rated for 0.05A to 2A @ 24 VDC. The low curren...:

What power supply is used with RX or LX switches?

Resolution: RX switch is request exit and LX switch is latch bolt monitor switch. They do not required a power supply directly. The electrified hardware that RX or LX switch conne...:

Who can adjust or replace the Chexit RX switch?

Resolution: For Chexit devices with solenoid driven shipped from the factory prior to 8-24-2015, the RX switch is ordered as a "Special CX RX Switch". It may only be installed or adjusted ...:

Can a 55 or 88 series device have a request to exit switch?

Resolution: The Request for Exit (RX) is available on the 55 and 88 Series Von Duprin devices.The RX switch is installed in the end case of 55 and 88 series exit devices.There is no kit to field install the RX...:

What degree of lever rotation is required to operate the RX feature?

Resolution: The RX switch is activated at approximately 18 degrees of lever rotation. :

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rating on RX switch ”

RELATED FAQS