Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rated doors closer ”

RELATED FAQS

Question
Answer
Are the Falcon SC Series door closers fire rated?
615R is not a door closer model number. It is a UL number for the Falcon SC Series closers.
Yes, the Falcon SC Series closers have a UL listing.
Is the 3130 Series closer Fire Rated?
The 3130 Series closer is UL listed- Fire Rated (UL-10C) for up to 3 Hr.The Door and Frame Manufacturer needs to be contacted to verify their Door/Frame rating would not be compromised wh...
Are LCN Closers Fire Rated?
All LCN closers have UL listings, and are Fire Rated for up to 3 hours.
What is a 62A shoe used for?
The 62A shoe is used when it is necessary to install the door closer (lower) down on the door so that it will operate under accessories such as overhead stops, coordinators, etc.
What special template (ST) is used with the 2030 closer and a low profile track and roller?
The 2030 closer requires a minimum 1-3/8" top rail on the door for the standard track.  For a top rail less than 1-3/8" and as narrow as 1", you could use the l...
Can you order a 1461 cylinder only?
The part number is: 1461-3071 for the door closer cylinder body.
What is SRI?
Special Rust Inhibitor (SRI) - is a pretreatment that is applied to the metal components prior to the addition of the LCN powder coat finish, standard or custom. ...
Can a 4010 be mounted with swing clear hinges?
Locate closer and arm from the centerline of the swing clear hinge pin.
Can you manually pull a 4040SE out of hold open?
The holding force on an SE/ME Series door closer is approximately 35 lbs. and they can be manually pulled out of hold open with approximately 35 lbs of force.