Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ QEL replacement kit ”

RELATED FAQS

Question
Answer
Is there a conversion kit to make 94/95 devices into a QEL?
Yes.    Required   Series 94 or 95 Fire or Panic 3FT/4FT or 2 ft 6 in / 2 ft 10 in Finish    Optional LX switch &nbs...
Can the Von Duprin EL or QEL conversion kit be used on an old style/obsoleted (pre 2003) 33 or 35 series vertical rod exit devices?
Yes, the current conversion kits will fit the old style/obsoleted 35 or 35 series vertical rod exit devices.
What is the part number for the dogging assembly for a 1690/1790/2390?
For any device made after 2001, the part number for the Falcon 1690 dogging kit would be KIT.1197 For devices made prior 2001, the dogging kit is no longer available and a new device must be ...
What is the part number for a horn on the Chexit?
If the horn fail to operate in the CX device you need to replace the Chexit module. 040086 is the part number for devices shipped after 8-24-2015 with motor driven.050228 is the...
Do we have a kit to replace old style 98/99 (pre August 1997) dogging parts?
050709-00 is the old style hex dogging retro kit for 22/33/35/98/99 devices.
Can you convert the EL33A/35A or EL98/99 series exit device to the QEL device?
The Von Duprin EL33A/35A/98/99 device can be converted to the QEL device by getting the correct sized QEL baseplate conversion kit. The existing PS914 or PS873 power supply can be used. ...
Can QEL and RX be added to an existing 9927?
The QEL conversion kit (3' or 4') and the RX switch kit (050251-00) can convert the 9927 to QEL-RX9927 device.
Does Von Duprin offer replacement QEL motors?
See below for part numbers:  114317-00 QELA Mod. Conv. Kit 040061-00 QELA Mod. Conv. Kit w/Connectors 958002-00 HD-QELA Mod. Conv. Kit 040062-00 HD-QELA M...