Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ qel installation instructions ”

RELATED FAQS

Resolution: The QELA motor that has shipped since 2015 is self calibrating. Older versions had a calibration button, and these notes would apply: Calibration is an internal process of the QEL device&...:

How do I identify the new QEL motor launched in 2012?

Resolution: The new QEL motor has a label affixed to the cover, the older QEL motor has no such label. See attached image.:

What are the Von Duprin part numbers for RX, LX and RX,LX-LC switch kits for field installation?

Resolution: The attached table shows the part numbers for LX-RX and LX-RX-LC switches field installed.:

What does chattering mean on a QEL?

Resolution: If a vertical rod device, verify the vertical rods are adjusted properly and there is not a bind at the strikes. Make sure the push bar is not binding at the pushbar guides or any...:

Where can I find templates for the 237L two point latch device?

Resolution: Click HERE for the instruction and template for 237L device.:

Do we make a blank trim plate to replace an existing trim?

Resolution: We have several blank trims listed in the price book to cover existing trim prep in door. DEVICE EO TRIM 22 230EO 88 880EO 98/99 990EO or 996EO* 33A/35A Rim, 33/3...:

What is needed to keep the EL device retracted all day?

Resolution: To keep the Von Duprin electric latch retraction EL or QELA exit device dogged (retracted) all day, have your access control, Key pad, key switch, fire alarm contact or any other signals ...:

Is there a conversion kit to make 94/95 devices into a QEL?

Resolution: Yes. Required Series 94 or 95 Fire or Panic 3FT/4FT or 2 ft 6 in / 2 ft 10 in Finish Optional LX switch &nbs...: