Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
push button power
”
RELATED FAQS
Question
Answer
How to change switches on a 8200 Console to maintained or momentary?
Resolution:
To replace the pushbuttons, remove the switch connector from the console main board Then press the pushbutton from the inside of the panel face out through the hole. There will be some resist...:
D73 locking issues with push button.
Resolution:
A design change occurred in 2001 to address a locking/unlocking issue with the discontinued D73 lever locks. This included modifying the cam and plug, spindle and using a different plung...:
AL-Series Plunger Assembly Instructions
Resolution:
Changing the plunger assembly on the AL-Series requires disassembling the chassis. Refer to Plunger Assembly Instructions for guidance.:
Will the 25-R or 25-V work with Simplex trim?
Resolution:
The 25-R or 25-V device does meet the trim input requirements set by KABA for their trim so the two should be compatible. However, the KABA trim has never been tested in house for the Fa...:
Schlage AD-Series - Replacement Inside Push Button (IPB)
Resolution:
The white-colored pushbutton on the main board is replaceable by ordering: 47269170 This component can be ordered through an authorized Schlage Electronics distributor. :