Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Projections Into clear width ”

RELATED FAQS

Resolution: Clear Opening Width for swinging doors is measured (with the door open 90 degree) from the face of door to stop soffit on strike jamb. &nbs...:

What is the projection or throw of the standard latch for a Falcon T series lock?

Resolution: The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. The standard latch projection is 1/2". Falcon also offers a 3/4" throw with&nbs...:

What is the minimum clear opening width required by ADA on a single door?

Resolution: The minimum clear opening width for ADA is 32" measured from face of door opened to 90 degrees to face of stop on strike jamb. There must be no hardware mounted to the door projectin...:

What is the difference between the 264 and 299 strikes?

Resolution: The projection dimensions are different. 264 strike has 9/16" projection299 strike has 13/16" projectionAll other dimensions are the same: