Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ product overhead stop ”

RELATED FAQS

Question
Answer
Can a 4110 EDA and a Glynn Johnson 100 be used together?
A special template is not needed, the closer drops down far enough on the door where it does not conflict with the GJ100 series concealed overhead stop. 
What special template (ST) is used with a 4040(XP) Rw/PA mount closer and a GJ overhead stop?
The use of a 62A Shoe (required) would be used to mount a 4040XP Parallel Arm  with a "SURFACE" GJ 70, 79, 81, 90, or 450 series stop. You would order the 4040XP with a Reg w/62A arm op...
What Glynn Johnson overhead stop do I need if I want heavy duty surface mounted?
Either the 70, 79HD, 81 or 90 series.
Can a 4040 regular mount installed on the pull side and a Glynn Johnson 90 be mounted together?
The LCN 4041/4040XP and the Glynn Johnson 90 series can be mounted in conjunction with each other without a special template.  The 4040 door closer is on the pull side of the door and the GJ 90 is ...
What special template (ST) is used with a 2030 closer and GJ over head stop?
Special template ST-2211 is used to mount a 2030 series closer with a GJ 70,79,81,90, and 450 series overhead stops. This ST works with any GJ "surface" mounted stop. The 2030 closer cannot b...
Can a Glynn Johnson 90 stop be used with a top jamb mounted 4040?
A 4040-18G drop plate will be needed to drop the closer and arm down far enough not to conflict with the GJ 90 series overhead stop.