pring Cush block assembly

RELATED FAQS

Question
Answer
The part number for the Spring Cush block assembly is: model number-3080. EXAMPLE: 4110-3080
ST-3195 is used to obtain the old style EDA or Cush arms which were assembled with threaded studs so that you could take apart the arm assemblies. Our current standard EDA and Cush arms are rivet...
The square block is probably the springcage assembly, L283-040.  This component has an internal spring to keep the lever in the horizontal position.
For LCN Cast Iron Closers it is (1 3/4") wide, (1 1/2") tall and (1 1/2") deep For LCN Alum body Closers it is (2") wide, (1 1/2") tall and (1 1/2") deep See HERE   The cent...
The 1460 Regular Arm part numbers are: Regular Arm -- 1460-3077 or 1460-3077L for long arm (must specify finish). Regular Arm with PA -- 1460-3077PA (must specify finish). Regular Hold Open Ar...
The 4040/4040XP closer mountings have the following maximum opening degree templating: The 4040/4040XP PA "Regular Arm" mount will allow for 180° max. opening. The 4040/4040...
When using the 4111 with a bar style coordinator MB-mounting brackets ordered from IVES are required. The brackets wrap around the coordinator to provide a surface for mounting the parallel arm ...