Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Power supply for ELR ”

Resolution: This is not an option, the older RDS-2 was used with the older Falcon Monarch ELR devices. The power supply would apply 24VDC for 1 second then drop down to 5VDC for the remainder of h...:

What power supply is used with RX or LX switches?

Resolution: The RX switch is request exit and the LX switch is latch bolt monitor switch. They do not require a power supply directly. The electrified hardware that the RX or LX switch...:

What power supply is need for Falcon EL devices?

Resolution: The Von Duprin PS914 power supply with either the 900-2RS or the 900-4RL option board is required.:

What power supply replaces the Von Duprin MPB840 or MPB842?

Resolution: MPB840 = PS914power supply, MPB842 = PS914-2RS power supply.:

Can you operate a Doromatic EL 1490 with an LCN power supply?

Resolution: This is not possible. Due to the device's 16 Amp in-rush it would require it's own PS914-2RS which will power 1 or 2 devices.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Power supply for ELR ”

RELATED FAQS