Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ PICTURES FOR IVES BLACK POWDER COATED FINISH ”

RELATED FAQS

Question
Answer
What exit device is weather rated?
Exit devices are not designed for exterior application. If used in an exterior applications then a powder coated finish on the 33/35 and 98/99 series are recommended for exterior applications. ...
Does Von Duprin offer an exit device for exterior use?
Most Panic devices are not designed for exterior applications. As with any mechanical device, exposure to the elements may affect the operation and life of the device and/or finish an...
What finishes should be used on exit devices near the ocean or in saltwater environments?
Von Duprin Exit Devices (33A/35A, 98/99, etc) are handled on a case by case basis regarding their ability to handle salt and chemical environments. Our powder coated finishes US28 (Anodized Alum...
When were 313AN & 315AN anodized finishes changed to SP313 (695) and 622 powder coat finishes?
Beginning December 6, 2010, all 33A, 35A, 98 & 99 devices ordered as 313AN Anodized was furnished in SP313 (dark brown powder coat).  All devices ordered as 315AN ...
What powder coat best matches US10B for a closer?
The closest powder coat finish by LCN is Dark Bronze (BHMA 695).
What are the LCN standard finishes?
The current Powder Coat finishes are: Aluminum (BHMA 689) Dark Bronze (BHMA 695) Brass (BHMA 696) Light Bronze (BHMA 691) Statuary Bronze (BHMA 690) Blac...
Tan Powder Coat can be ordered but only available as a special finish with a metal cover.
White Powder Coat can be ordered as a special RAL finish with a metal cover.
Can Steelcraft doors be powder coated?
Steelcraft does not offer factory powder coated doors and/or frames. Powder coatings usually require heat between 300 to 400 degrees to melt and cure the powder coat. The higher heat can ca...