Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Part Number for CIP ”

RELATED FAQS

Resolution: L9496 is a Privacy mortise lock with “Occupied” Indicator. Knob/lever retracts latchbolt from either side. Deadbolt thrown or retracted by key outside (retraction by key required in the event ...:

What is a 85445-900?

Resolution: The 710095-00 (85445-900) and 84570-900 are the older Sr. Swing analog (non-digital) control. It is replaced by the current Sr. Swing digital control box. If you need to replace an old ...:

The plug on my CIP Module is broken

Resolution: The miniature banana plug on the module can be ordered directly from the part manufacture (Pomona Electronics, Sales: 900-490-2361 part number model #4513) or from (Digi-Key part number 501-1425-ND).:

What parts do I need to add to the bottom rod of my existing Von Duprin 8827 LBR exit device?

Resolution: To add the bottom rod and latches on 8827LBR it requires Bottom Rod Kit part #050455-XX 8827 Rod Guide Kit part #50482-XX 8827 LR Bottom Latch Kit W/Cover part #050467-XX 304L Bottom Strike:

What part is required to add a sequencing feature to a 7902/7982 control box?

Resolution: The sequence card part number is 3426 and plugs in the "S" slot of a control boxes right next to the 10 pin terminal strip. The 7902/7902ES or 7982/7982ES can be converted to a 7902S/7902SES or 79...:

Repalcement parts for Schlage Electronics 672 TouchBar and 692 SmartBar

Resolution: See attached table: Schlage 692/672 Parts Cross ref:

Can you use lever trim on a 19V-EO without getting any additional parts?

Resolution: The Exit Only (EO) device will accept any 19 Series trim as the main cam for the trim input is always put on the device center case.: