Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Panic device size door width ”

RELATED FAQS

Resolution: The use of Panic Hardware and/or Fire Exit Hardware is required by the International Building Code (IBC) and NFPA 101 – The Life Safety Code, depending on which code and which edition of the code i...:

Can a door have an InPact device and glass lights?

Resolution: Glass lights available: Standard Glass Lights - The N4, N5 & V lite can be used at standard locations with out any modification. Glass Light Options - Other glass lights are available but ...:

Can the 2670 be cut down to fit smaller door widths?

Resolution: The 2670 Guard X device can't be cut down to fit doors less than 3 feet. This device is designed to fit doors 36"-48" door width.:

What are the maximum door width and height sizes?

Resolution: Maximum nominal (overall) single door sizes are as follows:L-Series (Laminated Door)20 Gage = 3’ 0” wide X 8’ 0” high18 Gage = 4’ 0” wide X 10’ 0” high16 Gage = 4’ 0” wide X 10’ 0” high1...:

Can you change 98/9947 WDC device to a 98/9947 hollow metal device?

Resolution: Yes, for Panic devices only by ordering the top rod kit part #050574, bottom rod kit part #050575, and screw pack #090061. Fire Rated devices can NOT be converted and would require a compl...:

How far can a 4ft EL 99R device be cut down to?

Resolution: EL98/99-4 ft rim device required minimum of 35.2" with 5/8" stop height door opening on single door and 35.56" with 4954/9954 mullion.:

What is the narrowest door a 4010 can be mounted on?

Resolution: When templated for 140° the 4010 will fit on a 16-1/2" door leaf MINIMUM.:

What is clear opening width?

Resolution: Clear Opening Width for swinging doors is measured (with the door open 90 degree) from the face of door to stop soffit on strike jamb. &nbs...: