Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ panic device electrical room ”

RELATED FAQS

Resolution: The use of Panic Hardware and/or Fire Exit Hardware is required by the International Building Code (IBC) and NFPA 101 – The Life Safety Code, depending on which code and which edition of the code i...:

Will the 6300 electric strike work with 88-F or the 88 rim panic?

Resolution: Von Duprin 6300 electric strike will operate with 88 rim but not 88F fire rated exit devices.:

How do I change the function of the Von Duprin 7500 mortise lock from Lever ( classroom ) to NL ( night latch )?

Resolution: To convert the Von Duprin 9975L to 9975NL exit function follow these steps (Note: the mortise lock is shipped as Night Latch from the factory): Turn the NL screw on 7500 mortise lock counter clo...:

Can an 18-R-L be converted to L-NL function in the field?

Resolution: Follow step 6 of the 18-R instructions to convert trim function to Night Latch(L-NL).:

What's needed to write a door hardware specification?

Resolution: The following items are needed for Spec Writers to write a door and hardware specification Building code being used Occupancy type or types Occupancy load for any rooms or areas of ass...:

Can I put an old style hex dogging kit (050153) on my 99 panic device?

Resolution: We don't recommend to use the old style hex dogging kit into the new 98/99 exit device but it would fit as long as the device is not fire rated.:

Can the 8200 power an EL panic device?

Resolution: The 8200 can not supply the power needed on an EL dev ice. The EL device requires a Von Duprin PS914-2RS or PS914-4RL power supply or the older Von Duprin PS873-2 or PS873-4TD models.:

What is the difference between Panic Hardware and Fire Exit Hardware?

Resolution: The most obvious difference (in the device) is the lack of mechanical dogging on a Fire Rated Device. There are some internal parts that may be different and the method it is secured to the d...:

How is a ELR or panic device wired to a Senior Swing?

Resolution: EL devices are wired to the Senior Swing, using the P10 (761465) cable. Connect the "GRAY" wire to the SC terminal on the 900-2RS card in the Von Duprin Power Supply and the "VIOLET" wire to the ...: