Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ panic bar mounting height ”

Resolution: We can build 33/3527A/F, 33/3547A/F, 98/9927/F, and 98/9947/F exit devices for 2 feet wide doors. Please note: therse are all vertical rod type devices. Because options within the e...:

Where are the part manuals for Falcon exits?

Resolution: Falcon (19. 24, 25, and XX) parts manuals for Exits are downloadable on the :

What are the ANSI recommendations for the actuator mounting height and distance between the wall actuator and the door opening?

Resolution: Always check the most current revision of the ANSI A156.19 standard for recommendation or requirement of the location of a Knowing Act switch. 2019 ANSI A156.19 states the requirement of the ...:

What height should a lock or deadbolt be installed?

Resolution: According to ANSI specifications for cylindrical or mortise locks: The lock strike centerline should be 40 5/16" from the bottom of the frame with the lock in relation to the strike.&...:

What are the dimensions of the SC70 footprint

Resolution: The measurements from center line to centerline of the mounting holes are 2-3/8" x 6-3/4".:

Why does the the 9954 mullion have taller bottom fittings than the 4954?

Resolution: Bottom mounting fitting on 9954 is taller than 4954. The taller bottom fitting is required for a fire rated application.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ panic bar mounting height ”

RELATED FAQS