Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ padlock key stop ”

RELATED FAQS

Resolution: Padlocks: a detachable and portable lock with a shackle which locks into its case. Schlage Commercial padlocks · KS-Series (Meets or excee...:

I can not remove the key from the cylinder on my BE365 deadbolt lock.

Resolution: After rotating the key to unlock the lock, you must return the key to its normal position to remove it. :

What does XQ06-878 stand for?

Resolution: The XQ06-878 is used to stamp "DO NOT DUPLICATE" on a key.:

Is the Falcon T381 a true classroom security function?

Resolution: T381 Classroom Security Lock is not a "true" classroom security / Intruder lock function. The T381 is classified as a ANSI/BHMA F88 function: Defined as Grade 1, Apartment, Exit or Public Toil...:

How do I order the KZ32CB1 or KC32CB2 key retaining option installed in the padlock?

Resolution: These items are no longer available. :

I have an old PL series padlock what is the KS replacement?

Resolution: :

What is the conventional cylinder used in a KS lock

Resolution: See Table below for part numbers: :

When was the KS padlocks introduced?

Resolution: The KS series was introduced in 2005.:

Outside lever on the T and RU 571's won't unlock after egress.

Resolution: Replace the lock chassis as necessary for any T locks exhibiting this issue. RU locks need to be replaced entirely. :

How do I change the function of the Von Duprin 7500 mortise lock from Lever ( classroom ) to NL ( night latch )?

Resolution: To convert the Von Duprin 9975L to 9975NL exit function follow these steps (Note: the mortise lock is shipped as Night Latch from the factory): Turn the NL screw on 7500 mortise lock counter clo...:

Why does my key cylinder spin and not lock or unlock the ND?

Resolution: This could also happen if the tailpiece isn't installed in a KIL, FSIC, or SFIC cylinder. The FSIC driver also could have come loose from the core in the spindle. :

Schlage AL small format spacer installation requirements.

Resolution: The Schlage AL-Series SFIC locks require one (1) small format spacer (D500-000) for 7-pin cores and two (2) small format spacers for 6-pin cores. When these spacers are not ins...:

The key just spins on a B560R B561R or B563R deadbolt.

Resolution: The Schlage full size interchangeable core (FSIC) prepped B560F, B561F, and B563F deadbolts all require a UL fire cup (R) in order to be UL listed. This fire cup is s...: