Issue: One or both levers don't stay horizontal and droop down.
Facts: Falcon T series locks in a high use application.
Cause: Weak or broken springs within t...
Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series. Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...
See Falcon MA lever assembly below:
The spring mechanism (E) returns the lever to horizontal. The parts are not sold separate, so if the lever sags, the entire lever assembly shoul...
Lever assemblies part numbers are found in the Pricebook. Note they are handed.
Levers may sag due to an incorrectly installed springcage or an incorrect springcage.Mortise locks with a fixed (rigid) lever such as an L9080 will use a spacer on the rigid lever (outside) and a s...
The old D series springcage part numbers are as follows:
C303-035 - Inside Springcage
C303-036 - Outside Springcage
These parts are no longer available.